It is impossible to predict the exact force needed for every pulling situation. The amount of press 

fit and force of removal can vary greatly between jobs. The set-up requirements along with the 

size, shape and condition of the parts being pulled are all variables which must be considered. 

Remember that a significant amount of force can be exerted with a puller. 

Respect theses forces and always observe safety precautions:

   1. Always select the proper puller for each pulling job. A puller equal to or larger than 

required.

   2. Inspect the puller before each use. Replace any worn or damaged parts with authorized 

parts.

   3. Read all instructions, warnings and cautions carefully. Follow all safety precautions to 

avoid personal injury or property damage during system operation. 

   4. Always wear safety goggles when using pullers.

   5. Take precaution against injury due to flying debris caused by failure of the tool or work piece. 

The benefits of an adequate pulling system can be substantial, but the equipment must be used 

properly!