how to work about Pneumatic injector puller tool set D2028
Pneumatic puller tool set for injector
Function
Pneumatic injector extractor kit. Includes extractor and
several adapters, compatible with a wide variety of injectors
on the market.
Through the use of pneumatic force, it allows extracting the
injectors without the use of inertia hammers or mechanical
extractors.
Advantages
✓ Ideal for removing injectors with ease
✓ Various adapters
✓ Wide compatibility with Diesel injectors
✓ All-in-one kit
Technical specifications
Material Steel
Input pressure 5-8 bar
Compatible brands Bosch, Delphi, Denso, Siemens
Contents
Professional jackhammer
Injector extraction extension
Adapters M20*1.0, M18*0.75, M17*1.0
M8*1.25, M8*1.0, M8*1.5 adapters
Adapters M14*1.5, M16*1.5, M18*1.5, M20*1.5, M22*1.5
Adapters M25*0.5, M25*1.0,
Adapters M26*0.75, M29*1.0, M31*0.75
Adapters M27*0.75, M27*1.0
How to work
Step 1
Select the correct connector according to the injector.
Place the Vibration Mate between the connector and injector, and
tighten it.
The torque of the wrench is between 20-30Nm.
WARNING: If loose it may cause damage during the impact drawing
process. Please make sure it is torqued correctly.
Step 2
Use high-pressure bar (the air pressure is generally between 5-8 bar).
WARNING: If the air is not clean and free of moisture it will cause the internal cylinder of the Vibration Mate to be stuck or corroded.
Use the air pressure switch to control the pulling frequency.
Keep an eye on whether the injector is pulled out.
Step 3
When the injector is about to be pulled out, switch off or reduce the air pressure in order to prevent the injector head from hitting the engine’s water bonnet or other parts.
Step 4
When the process is complete, store the Vibration Mate in its box in a dry place.
Regularly inject about 1ml of oil into the air inlet of the puller every 10 hours of work to prevent the internal piston cylinder from becoming wet and causing rust.