New type of coil spring compressor tool set is out now! order quick
time2022/05/17
- New type of coil spring compressor is out now! order quick
(New) coil spring compressor tool set with left handle
Suitable for MacPherson strut coil springs.
Features a yoke extension bracket that also allows use on conical springs. Supplied with three pairs of diƬ erent sized interchangeable yokes, for a wide range of vehicle applications.
Plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee.
Safety yokes are carefully shaped to stop the spring bowing while under compression.
Customized:
Label customized&design,
Case Color: Black, Blue, Red to choose
|
Item No
|
Compressor
|
Gold Yokes
Φ80-105mm |
Handed
|
Black Yokes Φ105-150mm | Handed | Silver Yokes Φ145-190mm | Handed |
|
B2001
|
YES
|
YES
|
N/A
|
YES | L/H | YES | L/H |
B2002 | YES | YES | R/H | YES | R/H+L/H | YES | R/H+L/H |
|
B2003
|
NO
|
NO
|
N/A
|
YES | L/H | YES | L/H |
|
B1027
|
YES
|
YES
|
R/H
|
YES | R/H | YES | R/H |
Operation
Tips:
WARNING! DO NOT compress the spring to an extent where the coil windings touch, fig.2.A.
WARNING! DO NOT compress the spring to an extent where the jaws touch fig.2.B.
Ensure the jaws and the body of the compressor are correctly aligned at all times during spring compression fig.3.A. For conical springs, the centre line of the spring should remain parallel to the compressor body, fig.3.B.
If necessary use the extension block as in fig.4 to keep the spring and compressor body parallel.
Secure the strut with a clamp, vice, or other adequate holding devices.
TO COMPRESS A STRUT REMOVED FROM A VEHICLE
Mount the selected jaws on the compressor body, fit the retaining bolts and tighten securely.
Rotate the hexagonal nut, using air or hand tools to drive the jaws apart to the length of the spring and to allow compression of as many windings as possible.
Place the spring strut compressor onto the spring, ensuring the spring seats correctly, fig.1.B., between the safety lips, fig.1.6. and the outer rib fig.1.7. and cannot slide out during compression.
Ensure the jaws and body are correctly aligned, fig.3 / 4.
Rotate the hexagonal nut, using air or hand tools and compress the spring until the upper support bearing is free and the spring will rotate
TO DECOMPRESS A STRUT REMOVED FROM A VEHICLE
To decompress the spring, reverse the compress procedure.