UNIVERSAL INNER BEARING PULLER instruction
time2022/07/29
- UNIVERSAL INNER BEARING PULLER instruction, from Chinese tool manufacturer-DNT Tools,custom tool
UNIVERSAL INNER BEARING PULLER
INSTRUCTIONS
1. Slacken the chain and place around the bearing.
2. Assemble the puller around the bearing sleeve as shown, lift the chain and tighten around the legs using key provided. With the chain pulling all three of the knife edge feet (1) into the joint below, the bearing starts to move.
3. Turn the force screw with the aid of a spanner. As movement starts and the gap increases
tighten the chain again to bring the legs in fully (2) and then continue drawing off the bearing.