How to quickly install the oil seal?
time2025/05/21
- To quickly install the crankshaft front oil seal, use the special tool:
①Place the oil seal on the guide shaft and align with the pressure plate;
②Fix the tool to the crankshaft and tighten screws with a 12mm socket;
③Turn the center screw to press the seal into place;
④Remove the tool and check the fit. This tool simplifies the process, ensuring accuracy and saving labor.
Today, I will tell you how to quickly install the oil seal using tools.
①First, put the crankshaft front oil seal on the guide shaft of the special tool, and fit the outer end face of the National VI crankshaft front oil seal tightly with the end face of the pressure plate of the special tool;
②Fix the special tool together with the crankshaft front oil seal to the front end of the engine crankshaft through the fastening screws on both sides, ensuring that the guide shaft of the special tool is tightly fitted with the front end face of the crankshaft, and tighten the fastening screws on both sides with a 12mm socket and a ratchet wrench;
③Use a 12mm socket with a ratchet wrench to turn the middle screw of the special tool clockwise, and use the special tool to press the crankshaft front oil seal into place;
④Finally, remove the special tool, check the tight fit of the oil seal after pressing, and the crankshaft front oil seal is installed. The crankshaft front oil seal disassembly and assembly tool is a set of products developed and designed for the disassembly and assembly of the engine crankshaft front oil seal. It is used with a ratchet wrench. It is simple to operate and convenient to disassemble and assemble, which greatly saves manpower and material costs; it meets the technical requirements for disassembly and assembly, making the operation more standardized.